Skip to content
One less thing Washes, steam sterilises, dries and stores Free delivery in West Malaysia. One less thing
nuviebaby Malaysia

Troubleshooting

Clean Max

Note any error code before you switch your machine off.

Troubleshooting, nuviebaby Clean Max

Note any error code before you switch your machine off.

Error codes. 5 beeps, the cycle stops, the lights go out and the code stays on the display.

Code What it is What to do
E1, E2 Temperature sensor Hold Power/Play for 2 seconds to try again. If the sensor reads normally the cycle carries on. If the code comes back, the machine drains and switches off. Contact our team.
E4 Fan Hold Power/Play for 2 seconds. The machine drains and switches off. Contact our team.

Other symptoms.

Symptom What to do
No Water icon, 5 beeps Fill the tank, then tap Power/Play
A button does nothing Mode buttons only work before a cycle starts. 2 beeps means it is draining, wait for it to finish
Bottles still dirty Run Deep Clean, space items out, use 1 Super Clean™ washing tablet per wash
Bottles still wet Choose a longer Dry setting
White spots on bottles Descale, then switch to distilled or RO water
Foam or bubbles Run Quick Wash empty with no tablet until it clears
Rattling during a cycle Stop and space the load out
Will not start Seat the lid fully, then tap Power/Play
Water not draining Check the hose is not kinked and sits below half the machine's height
Will not switch on Hold Power/Play for a full 2 seconds

If none of this fixes it, contact our team. Do not take the machine apart.

Still have a question?

Our team replies within one business day.

Email us