Setting up your machine

Fit the drain hose, connect power, fill the tank and you are ready to run your first cycle.

1. Put it on a dry, flat, level surface with room around it, so the air vents underneath stay clear.
2. Plug the 3-Pin Power Cord into the machine, then into a wall socket.
3. Fix the 1M Drain Hose to the machine and put the other end in the sink.
4. Remove the 2.5L Water Tank, fill it to the MAX line and put it back.
5. Press and hold Power to switch on.
6. Load your bottles, add 1 Super Clean™ washing tablet to the wash basin, fit the lid and tap Play/Pause.

Tip: use distilled or reverse osmosis water if you can. Tap water leaves limescale, which shows up as white spots on your bottles. Jug and carbon filters improve taste but do not remove the minerals that cause this.