Skip to content
One less thing Washes, steam sterilises, dries and stores Free delivery in West Malaysia. One less thing
nuviebaby Malaysia

Replacing the HEPA filter

Clean Max

Unplug, take off the hose, lid and tank, tip Clean Max forward and swap the filter.

Replacing the HEPA filter, nuviebaby Clean Max

Unplug, take off the hose, lid and tank, tip Clean Max forward and swap the filter.

Clean Max uses a round HEPA 13 Filter. It does not fit Clean, and the Clean filter does not fit Clean Max.

  1. Unplug the power cord at the machine, not at the wall.
  2. Remove the 1M Drain Hose.
  3. Lift off the Machine Lid and take out the 2.6L Water Tank.
  4. Tip Clean Max forward onto its front to reach the filter cover underneath.
  5. Remove the cover and take out the old HEPA 13 Filter.
  6. Fit the new filter and close the cover.
  7. Stand Clean Max back upright, then replace the water tank and the lid.
  8. Reconnect the drain hose and the power cord.

When to replace. Every 3 months, or sooner if the filter looks visibly grey or dry cycles run longer than usual. A two-pack lasts around 6 months.

Do not wash, rinse or reuse a HEPA filter. The filtration layer cannot be cleaned without destroying it. Do not handle with wet hands. Replace immediately if it looks damaged, torn or wet.

Still have a question?

Our team replies within one business day.

Email us